PRODUCTS

CXL® DDR4 Reuse
Netlist NVvault™-D4

DDR4 reuse / CXL memory expansion

Extend the Value of Your DDR4 Investment

Netlist NVvault™-D4 is designed to reuse qualified DDR4 assets for CXL® host-memory expansion, targeting additional capacity for in-memory databases and virtual-machine hosts.

≥512 GBCapacity targetProduction-optimized design · In development

A standards-based CXL 2.0 controller with advanced RAS and data-integrity features provides the foundation. The production-optimized design builds on the same standards-based CXL 2.0 controller architecture used in the current 12-DIMM POC.

Branded illustration of the 12-DIMM Netlist NVvault-D4 POC card

12-DIMM POC platform · Branded hardware illustration

The value of DDR4 reuse

More Value from Memory You Already Own

01

Preserve Memory Value

Extend the useful life of qualified DDR4 assets and reduce the need for new-memory purchases. Evaluate total cost across screening, integration, power and workload behavior, not module cost alone.

02

CXL Ecosystem Confidence

A standards-based CXL 2.0 controller provides the foundation for memory expansion, with controller-level interoperability evidence reflected in the CXL Integrators List. Netlist card qualification remains separate.

03

Reliability Beyond the Controller

Enhanced controller RAS, ECC and data-integrity protection are part of the design. A qualification-led approach also considers DIMM suitability and populated-card behavior on the target host.

A qualification-led approach

From DDR4 Inventory to a Qualified Memory Tier

The proposed evaluation framework connects module suitability, controller protection and system validation. Specific screening procedures and service availability remain to be defined with Netlist; this is not an announced screening service.

01

Start with the DIMMs

Review module type, capacity, condition and inventory history. Define screening and acceptance criteria for the intended population, including RDIMM, LRDIMM and 3DS RDIMM configurations.

02

Protect Data in Operation

Evaluate controller RAS, ECC and error-reporting behavior within the populated system. Controller protection complements module screening; it does not replace it.

03

Validate the Complete System

Define populated-card, firmware and host qualification, then assess application response time, power and total cost on the target platform. Use those results to determine deployment suitability.

Product status & configuration

A Path to High-Capacity DDR4 Reuse

Development Status

The current platform is a 12-DIMM POC. A production-optimized Netlist design is in development, building on the same standards-based CXL 2.0 controller architecture, with a capacity target of ≥512 GB. Supported DIMM types and population remain subject to engineering confirmation and qualification.

Production-optimized design specifications are preliminary targets, not 12-DIMM POC results. Each board requires separate qualification; final configurations and availability remain subject to validation. No measured application-performance or production-availability claim is made.

Proof of concept

The Current POC Platform

The 12-DIMM card provides the current POC platform for DDR4 reuse and CXL memory expansion.

12DIMM socketsCurrent POC platform
Platform 12-DIMM proof of concept
Controller Standards-based CXL 2.0 memory-expansion controller
Evaluation focus Qualified DDR4 reuse for CXL host-memory capacity expansion
Next design Production-optimized Netlist design in development, building on the same standards-based CXL 2.0 controller architecture
Specification boundary The production-optimized design’s capacity, speed and power targets do not describe this 12-DIMM POC.

Production-optimized design · In development

Designed for Deployment

The production-optimized design builds on the same standards-based CXL 2.0 controller architecture used in the current 12-DIMM POC, targeting ≥512 GB with qualified DDR4 memory. Supported DIMM types and population remain subject to engineering confirmation. The specifications below apply to this design in development.

≥512 GBCapacity targetQualified DDR4 memory
Controller Same standards-based CXL 2.0 controller architecture as the 12-DIMM POC
Host interface CXL Type 3, native CXL 2.0; PCIe 5.0 x16 preferred
DIMM support DDR4 RDIMM, LRDIMM and 3DS RDIMM supported
Memory speed target DDR4-3200 target, subject to signal-integrity and DIMM qualification
Populated capacity ≥512 GB target, subject to DIMM and platform qualification
Compression & encryption Inline LZ4 and AES-XTS 256 planned; combined operation to be validated
Reliability & management Enhanced DRAM RAS, ECC, poison/error reporting, secure boot, firmware update and telemetry requirements
Form factor & power Full-height, full-length (FHFL); 75 W slot budget plus auxiliary power. Total board power is TBD.
Host targets Intel and AMD CXL hosts prioritized. NVIDIA Vera targeted for evaluation; other CXL-capable Arm hosts considered case by case. All platforms require Netlist card and system qualification.
Chassis targets Qualified 2U–4U chassis targeted, with 1U evaluated case by case

Host compatibility depends on CXL enablement, firmware, operating-system support, available expansion slots and validated card/DIMM configurations.

See the NVvault™-D4 product brief for the two-page overview and design targets.

Production-Optimized Design

DDR4 Capacity, Connected Through CXL

A CXL memory tier connects the host to qualified DDR4 DIMMs through a standards-based memory-expansion controller. This architecture represents the production-optimized Netlist design in development.

Capacity Is the Objective

Workload placement and host integration determine the value of an expanded memory tier. Local-DRAM-equivalent latency is not claimed.

Match Memory to the Platform

RDIMM, LRDIMM and 3DS RDIMM support provides options for DDR4 reuse. Qualify the selected module type, population and operating point with the target host.

Evaluation focus

Built Around Capacity-Sensitive Workloads

Focus the evaluation on applications that need more host-memory capacity. Measure the benefit against your existing configuration and service-level requirements.

Illustration of database infrastructure and data protection

In-Memory Databases

Evaluate DDR4 reuse as an additional capacity tier for memory-intensive databases. Validate the working set, placement policy and application response time on the target host.

Illustration of memory-intensive enterprise computing

Virtual-Machine Hosts

Explore additional host-memory capacity for virtualization. Assess hypervisor support, NUMA placement and workload mix before making any VM-density claim.

Explore further

Resources & Product Information

CXL Consortium · Industry perspective

The Rebirth of Persistent Memory and CXL DDR4 Reuse

Explore how CXL can extend the useful life of DDR4 memory in new capacity tiers in this CXL Consortium article. Its broader discussion of persistent memory is separate from D4’s DDR4-reuse focus.

Evaluation Questions

What should I bring to a DDR4 reuse discussion?

Share your DIMM part numbers, types, capacities, quantities and available inventory history, together with the target server, operating system or hypervisor, workload and capacity goal. These inputs help define suitability questions and the scope of a proposed evaluation.

Is the production-optimized design available today?

The production-optimized Netlist design is in development. The current platform is a separate 12-DIMM proof of concept. Final specifications and availability are not established.

Does controller-level interoperability qualify the Netlist card?

No. Controller-level evidence reflected in the CXL Integrators List does not replace Netlist board, firmware, DIMM or host qualification. No Netlist NVvault™-D4 card certification is claimed.

Is D4 the same as NVvault persistent memory?

No. NVvault™-D4 focuses on qualified DDR4 reuse and CXL memory-capacity expansion. This page makes no NAND-backup, power-loss data-retention or persistent-memory claim for D4. Visit Netlist’s CXL NVvault™-PM page for the separate persistent-memory POC.

Product Brief

Start with your inventory

Discuss Your DDR4 Reuse Evaluation

Bring your DIMM inventory, target host and workload requirements. Let’s discuss capacity goals, qualification needs and the inputs for a meaningful TCO evaluation.

NVvault™ is a trademark of Netlist, Inc. Compute Express Link, CXL, and the CXL Logo are Registered Trademarks of the CXL Consortium. Other names are the property of their respective owners.

Product information is preliminary and subject to change. Qualification, specifications and availability are not final.